Nutrients and suspended solids in dry weather and storm flows from a tropical catchment with various proportions of rural and urban land use

The results of an investigation characterizing the nutrients and suspended solids contained in stormwater from Kranji Catchment in Singapore are reported in this paper. Stormwater samples were collected from 4 locations and analyzed for the following eleven analytes: TOC, DOC, TN, TDN, NH₄⁺, NO₂⁻ + NO₃⁻ (NO_x), TP, TDP, OP, SiO₂ and TSS. Stormwater was sampled from catchments with various proportions of rural and urban land use, including forested areas, grassed areas, agricultural and residential and commercial areas. The event mean concentrations (EMCs) of nutrients and TSS from sampling stations which have agricultural land use activities upstream were found to be higher. Comparison of site EMCs (SMCs) with published data showed that the SMCs of the nutrients and TSS are generally higher than SMCs reported for forested areas but lower than published SMCs for urban areas. Positive correlations (p < 5%) were found between loading and peak flow at locations most impacted by ubanisation or agricultural activities. Correlation between loading and rainfall variables was less distinct. EMC was found to correlate less with rainfall and flow variables compared to pollutant loading. Unlike loading, no consistent pattern exists linking EMC to any particular storm or flow variable in any of the catchments. Lastly, positive correlations were obtained between the particulate forms of nitrogen and phosphorus and TSS.     

Autochthonous clams monitoring of Ganzirri Lake (Sicily)

Two autochthonous clams, Venerupis aurea laeta and Cerastoderma edule/glaucum, collected for a period of 1 year, from May 2007 to January 2008, were studied in the Cape Peloro lagoon. On the samples, it was evaluated the presence of pathogenic microorganisms and proteins, lipids and yield edible part were determined. It was evaluated the concentration of mineral elements (Cd, Cu, Mn, Se, Pb, Zn) and organic contaminants (∑DDT and PCBs). Salmonella is never present in any sample. Total and faecal coliform values have always been under law limits for alive bivalves mussels production and sale. Zn, Cu, Cd and Pb levels were found in clams where they are slightly lower too. Both species do not show significant changes for Mn and Se. DDT and PCBs traces were discovered in Ganzirri Lake’ samples, but in all observed cases, they were below law limits. As a result of all these observations, it is clear that, in recent years, the bivalve’s use of Ganzirri Lake does not denote toxicological risk to human health.     

Influence of salinity and temperature on the activity of biosurfactants by polychaete-associated isolates

Influence of different parameters on biosurfactant (BS) activity was carried out on strains that were isolated from the polychaetes Megalomma claparedei, Sabella spallanzanii and Branchiomma luctuosum and additional 30 strains that were previously identified as potential BS producers from crude oil enrichments of the same polychaete specimens. The selection of BS-producing strains from polychaete natural samples was carried out by using standard screening tests. The BS activity by each isolate was evaluated for the effect of salinity and temperature on emulsion production and surface tension reduction, during incubation in mineral medium supplemented with tetradecane or diesel oil. All isolates showed a similar time course of BS activity, and the latter was more influenced by salinity rather than temperature. Some of the BS producers belonged to genera that have not (i.e. Citricoccus, Cellulophaga, Tenacibaculum and Maribacter) or have poorly been (Psychrobacter, Vibrio, and Pseudoalteromonas) reported as able to produce BSs. This is remarkable as some of them have previously been detected in hydrocarbon-enriched samples. Results confirm that filter-feeding polychaetes are an efficient source for the isolation of BS producers.     

活性污泥驯化技术与高浓度CTMP废水生物处理的研究

为探讨活性污泥处理高浓度ＣＴＭＰ制浆造纸废水,研究了活性污泥驯化工艺的良性对生物系统污泥沉降性能及处理效果产生的影响。３个月多的运行试验结果表明,改良后的污泥驯化工艺即间歇式与连续式进料相结合的污泥驯化工艺能够明显改善污泥沉降性能,污泥的ＳＶ３０为２９９０－３２０ｍｇ／Ｌ,ＳＶＩ为４８－５５ｍｌ／ｇ,并显著增加处理效果,ＣＯＤ去除率７７％－８５％,ＢＯＤ５去除率９０％－９５％,ＴＳＳ去除率７５％－     

MIE determination and thermal degradation study of PA12 polymer powder used for laser sintering

Pulverized materials such as metallic or polymer powders play a considerable role in many industrial processes. Their use requires the introduction of preventive safeguards to control the plant's safety.PA12 polymer powder processing by laser sintering is characteristic of this tendency. The present work concerns PA12 powder (bimodal particle size distribution: 10 μm and 55 μm) and relates to explosion sensitivity and the thermal degradation of this powder, which can occur during laser sintering. Minimum Ignition Energy is determined using a modified Hartmann tube combined with the Langlie method developed in the PRISME Laboratory. This study shows the influence of parameters such as distance between the electrodes, powder concentration and arc power on MIE values. Theses parameters vary in the range of 3–6 A for the current intensity of the spark and the electrode gap in the range of 2.5–4 mm. The MIE is obtained for a spark gap of 3 mm and current intensity of the 4 A spark in our device. It shows that the MIE is less than 40 mJ for concentrations approaching 1000 g/m³. At lower concentrations (under 150 g/m³) the MIE increases but discrepancies in measurements appear, probably because of the static electricity that creates strong irregularities in dust dispersion. The second part of this study concerns the thermal degradation of the PA12 which is performed by thermogravimetric experiments coupled with mass spectrometric (MS) analysis for gas investigation. The mass loss measurement combined with the gas analysis allows the principal stages of degradation to be determined so as to calculate the kinetics parameter PA12. Experiments have been performed for different heating rates between 1 and 30 K min^?1 and the reproducibility of experiments has been verified. The activation energy is determined using two methods: Freidman and KAS. For a reaction rate of between 0.2 and 0.6, the activation energy is nearly constant. The KAS method gives a value of E_a = 250 kJ mol^?1 and the Friedman method gives E_a = 300 kJ mol^?1. The gas analysis by MS shows that oxidation begins at over 350 °C and finishes at under 650 °C with the formation of CO₂ and H₂O. Other major peaks with an m/z ratio of 29, 28 and 30 are noticed in this range of temperature. They show the presence of intermediate species such as C₂H₆, NO or CH₂O. The presence of HCN is also detected (m/z ratio of 27).     

Rapid full‐scale bioremediation of perchlorate in soil at a large brownfields site

The former Bermite site north of Los Angeles, California, was used to manufacture various explosives and related products containing energetic compounds, including perchlorate. Remediation of perchlorate in site soil and groundwater is being conducted to meet regulatory requirements and allow planned redevelopment activities to proceed. The general approach to perchlorate remediation of shallow soil at the site includes excavation of affected soils followed by ex situ bioremediation. Glycerin was chosen for use as an electron donor because of its stability, safety, low cost, and regulatory acceptance. However, full‐scale bioremediation operation with glycerin initially resulted in inconsistent results despite consistent perchlorate biodegradation observed in treatability study microcosms. To eliminate the inconsistency and optimize the biotreatment process, additional studies were performed in the field on parallel tracks to determine crucial factor(s) that influenced inconsistent breakdown of perchlorate in site soils. Total Kjeldahl nitrogen (TKN) was determined to be a significant factor limiting perchlorate biodegradation. The addition of di‐ammonium phosphate (DAP) resulted in the consistent and complete perchlorate removal, generally within two weeks of incubation with a median destruction rate of about 200 μg/kg/day. Soil processing rates were gradually increased over the year, and, by the summer, approximately 2,000 to 2,500 tons of soil were being processed per day with a total of approximately 160,000 tons processed by the end of July. The total unit treatment cost for the process is about approximately $35/ton. The glycerin‐DAP process is playing a major role in the remediation of this 1,000‐acre former industrial site. © 2008 Wiley Periodicals, Inc.     

Cell-free fetal DNA coming in all sizes and shapes

Cell-free fetal DNA analysis has an established role in prenatal assessments. It serves as a source of fetal genetic material that is accessible non-invasively from maternal blood. Through the years, evidence has accumulated to show that cell-free fetal DNA molecules are derived from placental tissues, are mainly of short DNA fragments and have rapid post-delivery clearance profiles. But questions regarding how they come to being short molecules from placental cells and in which physical forms do they exist remained largely unanswered until recently. We now know that the distributions of ending sites of cell-free DNA molecules are non-random across the genome and bear correlations with the chromatin structures of cells from which they have originated. Such an insight offers ways to deduce the tissue-of-origin of these molecules. Besides, the physical nature and sequence characteristics of the ends of each cell-free DNA molecule provide tell-tale signs of how the DNA fragmentation processes are orchestrated by nuclease enzymes. These realizations offered opportunities to develop methods for enriching cell-free fetal DNA to facilitate non-invasive prenatal diagnostics. Here we aimed to collate what is known about the biological and physical characteristics of cell-free fetal DNA into one article and explain the implications of these observations.